All machinery and equipment are needed maintenance, gantry milling wood mold is no exception, in fact, the difference between maintenance with no maintenance is great, good maintenance can extend the life of machinery, but the method used is not correct maintenance is also very importantly, the relevant aspects are described below under the gantry milling wood mold maintenance. 1, machine tool maintenance exterior appearance should be kept clean and all corners of the rail to maintain good lubrication, above do not have the material, such as iron metal powder worn rails; table should be kept clean and free of oil, 2, column, beam , Head frequent cleaning and maintenance guide, screw, rod these parts, there is a strain or scratches to repair the rail; Cypriot iron repair scratch vertical milling head and sides of the rail gap, adjust the tightness; milling spindle taper burr hole or prints to be repaired. 3, machine oil tank, the filter should be kept clean, and regularly check the pump, change the oil regularly to maintain adequate oil; check the cleaning tubing, tubing kept clear so that no leakage, etc; regular check or change the oil cup, oil line, linoleum, so that milling machine to maintain good lubrication. Die forging machinery, gantry milling wood mold, carved wooden mold www.htjlmmc.com